We’ve always used PLA as material for our 3d prints, for a number of reasons: it has great acoustic properties, it is bio-based (made from corn rather than oil), it sheds very little harmful gas or dust particles during printing and to boot it is very easy to print. Unfortunately it can not withstand temperatures above 60°C, so this summer a hot car in the sun was not a good place to leave an instrument, as a few people have experienced.
So since the summer I have been working hard on climate proofing our instruments. Here’s a picture of two instruments in our home-built “let’s call it a climate chamber :)”.

Fortunately some of my closest friends have been at the forefront of 3d printer development for the last 15 years, so I have access to great intel. After lots of testing I was almost ready to change all our parts to ASA. It has great temperature resistance and acceptable acoustic properties, although unfortunately it’s not as nice for people and planet.
But then I found this stuff: https://colorfabb.com/pla-hp-black. It’s regular PLA, but specifically improved for thermal resistance (I understand that it has to do with polymer chain length selection, leading to a certain crystallization behavior in the plastic matrix). It’s bio-based and even locally developed and manufactured! We are now in the process of changing to this new material, and will keep monitoring and improving the process.
